View AD-SOIC20-A_2053995.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

state-of-the-ar t device pr ogrammer user guide (revision 1.04) field pr ogrammable har dwar e
i micro-pro user guide v1.04 infor mation in this document is subject to change without notice and does not r epr esent a commitment on the par t of the manufactur er . the softwar e described in this document is fur nished under license agr eement or nondisclosur e agr eement and may be used or copied only in accor dance with the ter ms of the agr eement. it is against the law to copy the softwar e on any medium except as specifically allowed in the license or nondisclosur e agr eement. the pur chaser may make one copy of the softwar e for backup purposes. no par t of this manual may be r epr oduced or transmitted in any for m or by any means, electr onic, mechanical, including photocopying, r ecor ding, or infor mation r etrieval systems, for any purpose other than for the pur chaser s personal use, without written per mission. copyright infor mation (c) 1994-1997 copyright equinox t echnologies. all rights r eser ved. atmel tm and a vr tm ar e trademarks of the atmel corporation keil c51 tm and dscope tm ar e trademarks of keil elektr onik gmbh micr osoft, ms-dos, w indows tm and w indows 95 tm ar e r egister ed trademarks of the micr osoft corporation ibm, pc and ps/2 ar e r egister ed trademarks of inter national business machines corporation intel, mcs 51, asm-51 and pl/m-51 ar e r egister ed trademarks of the intel corporation ever y ef for t was made to ensur e accuracy in this manual and to give appr opriate cr edit to persons, companies and trademarks r efer enced her ein.
ii micro-pro user guide v1.04 contacts equinox t echnologies uk limited 3 atlas house, st geor ges squar e, bolton, england bl1 2hb t elephone sales ....................... : +44 (0) 1204 529000 fax .............................................. : +44 (0) 1204 535555 e-mail ......................................... : sales@equinox-tech.com w eb site .................................... : www .equinox-tech.com for technical suppor t on this pr oduct please e-mail us at: micr opr o@equinox-tech.com in line with our policy of continuous impr ovement, the meridian for w indows? softwar e is updated on a r egular basis. if you would like to r eceive an automatic e-mail ever y time a new version is r eleased, please make sur e you have r egister ed your system with equinox and you have quoted your e-mail addr ess. y ou may cancel this ser vice at any time. the meridian softwar e updates can cur r ently be downloaded fr om the following places: inter net : www .equinox-tech.com ftp site : ftp.equinox-tech.com atmel bbs : +1 408 436-4309 softwar e updates
iv micro-pro user guide v1.04 contents introduction ...... 1 system specifica tions ...... 2 inst alla tion over view ...... 3 hardw are inst alla tion instructions ...... 4 softw are inst alla tion ...... 5 p arallel por t selection ...... 6 hardw are over view ...... 7 softw are over view ...... 8 device selection ...... 10 device position & orient a tion ...... 11 device suppor t ...... 12 8051 suppor t products guide ...... 14 a vr suppor t products guide ...... 15 miscellaneous accessories ...... 16
1 micro-pro user guide v1.04 he micr o-pr o is a state-of-the-ar t device pr ogrammer suppor ting a wide range of pr ogrammable devices. the pr ogrammer was originally developed to pr ogram the atmel a t89c and a t89s micr ocontr oller families, but suppor t has now been widened to include many other 8051 derivatives and also a selection of popular atmel flash and eeprom memories. the micr o-pr o pr ogrammer featur es extr emely fast pr ogramming speeds due to its optimised field-pr ogrammable har dwar e. fur ther speed enhancements have been made possible by vir tue of the parallel data connection to the pc. the power ful fr ont-end softwar e caters for both involved development cycle pr ogramming needs and pr oduction batch pr ogramming r equir ements. micro-pro device programmer highlights ? state-of-the-ar t device pr ogrammer ? suppor ts the entir e atmel 89c & 89s micr ocontr oller families as standar d ? suppor ts many generic 8051 devices (87c51-f a/fb/fc) ? suppor ts many atmel a vr micr ocontr oller derivatives ? also suppor ts many atmel flash, eeprom and configurator devices ? field pr ogrammable har dwar e ensur es futur e device suppor t ? f ast pr ogramming times due to optimised har dwar e/softwar e algorithm for each device ? device manufactur er cer tification for many algorithms ? suppor ts most dil devices up to 40 pins without an adaptor ? adaptors available for many other package types ? connects to spar e pc parallel por t ? straightfor war d har dwar e/softwar e installation ? suppor ts pr ogramming of security lock bits security tables and special option bits intr oduction t
2 micro-pro user guide v1.04 system specifications minimum system contents micr o-pr o device pr ogrammer power supply (psu) parallel cable (25w m/m pin to pin) micro-pro p arallel programmer specifica tions pr ogrammer size : 10.5 x 8 x 2 cm shipped w eight : appr ox 1.5kg psu : 15v dc @250ma por t connection : parallel 25-way d zif socket : quality 40way socket accepts both 0.3/0.6 pitch devices minimum pc requirements the minimum har dwar e and softwar e r equir ements to ensur e that the pr ogrammer operates cor r ectly ar e as follows: 100% ibm compatible 386+ w indows 3.1 or higher minimum 4mb ram minimum 1mb fr ee har d disk space spar e pc parallel por t
3 micro-pro user guide v1.04 installation over view per for m har dwar e installation per for m softwar e installation select the cor r ect parallel por t por t installation t r ouble shooting guide t r y selecting another lpt por t pr ogrammer should now be on line f ail p ass the har dwar e/softwar e over view for the installation pr ocess of the micr o-pr o pr ogrammer is detailed diagrammatically below . please r efer to the following pages for a mor e detailed explanation.
4 micro-pro user guide v1.04 har dwar e installation instr uctions over view the micr o-pr o pr ogrammer connects to any spar e pc parallel (lpt) por t. if you only have one parallel por t and this is in use for eg. a printer , it may be possible to add a second parallel por t to your machine by inser ting a new i/o car d. if you ar e limited to one parallel por t eg. on a laptop, then it is necessar y to r emove any other devices connected to that parallel por t for the duration of using the micr o-pr o. for fur ther har dwar e installation help, please r efer to the installation t r oubleshooting guide . connect the pr ogrammer to the pc as follows: 1 plug male end of pc parallel cable into spar e pc parallel por t 2 plug female end of pc parallel cable into 25-way connector on the pr ogrammer 3 plug power jack into pr ogrammer 4 plug mains adaptor into suitable mains supply the pr ogrammer red power led should now be illuminated 1 2 4 psu input 3
5 micro-pro user guide v1.04 the micr o-pr o pr ogrammer is supplied with 'micr o-pr o for w indows' pc driver softwar e. this softwar e is supplied on one 3.5" floppy disk. to inst all 'micro-pro for windows' softw are: ? boot the pc into w indows envir onment (w in 3.1 or w in 95 ) ? inser t 'micr o-pr o for w indows' disk into floppy disk drive (a: / b:) ? select the 'run...' command fr om the 'file' menu in the pr ogram manager ? select 'br owse' and navigate to the floppy drive (a: / b:) ? select 'micr opr o.exe' ? select the 'ok' button the softwar e installation pr ogram should now display an intr oductor y scr een. please follow the on-scr een pr ompts in or der to complete the softwar e installation pr ocess. for mor e detailed infor mation on which libraries to install, please r efer to the device suppor t section. on completion, the installation pr ogram will install the 'micr o-pr o' icon within a new pr ogram gr oup called 'micr o-pr o'. t o launch the softwar e, simply double-click on the 'micr o-pr o' icon. softwar e installation
6 micro-pro user guide v1.04 the micr o-pr o pr ogrammer plugs into a spar e parallel por t of any ibm compatible pc including the majority of laptop machines. the pr ogrammer should operate cor r ectly in the following parallel por t (lpt) modes: i. uni-dir ectional mode ii. bi-dir ectional (enhanced or epp) mode however , if the pr ogrammer fails to be detected it is wor th switching the lpt mode between uni and bi-dir ectional using the pc bios and then r e-tr ying the communication test. to select the correct p arallel por t (lpt): i. fr om the menu bar select < t est> operation. if the pr ogrammer is still not detected, please r efer to the installation t r oubleshooting guide located in the help file on disk. parallel por t selection (select por t)
7 micro-pro user guide v1.04 har dwar e over view 1 4 5 6 7 3 2 key 1 psu input 2 parallel cable connection (to pc) 3 zif (zer o inser tion for ce) socket (40 way) 4 auxiliar y power connector 5 power led (red) 6 active led (y ellow) 7 atmel a t6002 fpga
8 micro-pro user guide v1.04 blank check checks if the cur r ently selected device is blank. i.e. all locations = ffh softwar e over view load file to buffer (f9 or ctrl + l) allows you to select a file or multiple files and load the file(s) into the pr ogrammer buf fer ar ea(s). cur r ently suppor ts intel hex and binar y file for mats as standar d. verify device compar es the contents of the buf fer ar ea(s) with the contents of the cur r ently selected device. sa ve to disk (ctrl + s) allows you to save the contents of the buf fer(s) to a file. cur r ently suppor ts intel hex and binar y file for mats as standar d. the micr o-pr o for w indows softwar e featur es many power ful functions which can be activated by simply clicking a single icon. other utilities and commands ar e available by selecting the r elevant menu option. for fur ther infor mation about the micr o-pr o for w indows softwar e , please r efer to the 'on- line help system' supplied with the softwar e. the most commonly used functions for which an icon exits ar e listed below .
9 micro-pro user guide v1.04 softwar e over view continued device read reads the contents of the cur r ently selected device into the pr ogrammer buf fer ar ea(s). program device pr ograms device with contents of buf fer special options allows you to read/write the special option bits of cer tain devices which suppor t non-standar d featur es. security allows you to read/write the security lock bits of any device which suppor ts this featur e. device auto-program per for ms a complete pr ogramming cycle including signatur e check, erase, blank check, pr ogram, special options, security etc erase device per for ms an electronic erase on the cur r ently selected device. please note: otp and eprom devices do not suppor t an electronic erase cycle.
it is necessar y to select the par ticular device to be pr ogrammed as follows: e.g. t o select the atmel a t89s8252 micr ocontr oller as the cur r ent device 10 micro-pro user guide v1.04 device selection fpga configurator serial eeprom micr ocontr oller flash memory eeprom memory select orientation information check signature blank check t t t t t t atmel atmel a vr intel dallas philips/signetics t t t t t a t89c1051 a t89c2051 a t89s8252 a t89s553 a t89ls8252 2 y ou will now be pr esented with a list of device types choose microcontroller 1 select the device menu and choose select 3 a list of device manufactur ers is now displayed select the one you r equir e i.e. atmel 4 a list of micr ocontr oller devices pr oduced by that manufactur er is now displayed. select the one you r equir e i.e. a t89s8252 the cur r ently selected device is now active
11 micro-pro user guide v1.04 device position & orientation device position & orientation key 1 microcontroller (40 pin - 0.6 pitch) e.g. 89c51, 87c52 2 flash (32 pin - 0.6 pitch) e.g. a t29c512, a t29c010 p arallel eeprom (32 pin) e.g. 28c512 3 microcontroller (20 pin - 0.3 pitch) e.g. a t89c2051, a t90s1200 4 serial eeprom (8 pin - 0.3 pitch) e.g. a t24c08, a t25010 5 serial configura tors (8 pin - 0.3 pitch) e.g. 17c256 the micr o-pr o pr ogrammer accepts a wide variety of devices in dual-in-line (dil) packages without the need for additional package adaptors or conver tors. the zer o inser tion for ce (zif) socket caters for dil device with up to 40 pins and can also accept both 0.3 and 0.6 pitch devices. the diagram below shows the cor r ect position and orientation of the tar get device in the zif socket. the position of pin 1 of the tar get device is marked by a dot. 3 1 2 4
12 micro-pro user guide v1.04 device suppor t a tmel 89c micr ocontr oller a t89c51 89c micr ocontr oller a t89c52 89c micr ocontr oller a t89c55 89c micr ocontr oller a t89l v51 89c micr ocontr oller a t89l v52 89c micr ocontr oller a t89l v55 89c micr ocontr oller a t89c51 -xxxx-5 89c micr ocontr oller a t89c52 -xxxx-5 89c micr ocontr oller a t89c55 -xxxx-5 89c micr ocontr oller a t89l v51 -xxxx-5 89c micr ocontr oller a t89l v52 -xxxx-5 89c micr ocontr oller a t89l v55 -xxxx-5 89c micr ocontr oller a t87f51 89c micr ocontr oller a t87f52 89c micr ocontr oller a t89c1051 89c micr ocontr oller a t89c1051u 89c micr ocontr oller a t89c2051 89c micr ocontr oller a t89c4051 89s micr ocontr oller a t89s8252 89s micr ocontr oller a t89s53 89s micr ocontr oller a t89ls8252 89s micr ocontr oller a t89ls53 eeprom memor y a t28c010 -dil32 eeprom memor y a t28c010e -dil32 eeprom memor y a t28c010 -plcc32 eeprom memor y a t28c010e -plcc32 eeprom memor y a t28c16 -plcc32 eeprom memor y a t28c16e -plcc32 eeprom memor y * a t28c17 -plcc32 eeprom memor y a t28c17e -plcc32 eeprom memor y * a t28c64 -plcc32 eeprom memor y * a t28c64e -plcc32 eeprom memor y * a t28c64x -plcc32 eeprom memor y * a t28c64b -plcc32 eeprom memor y * a t28hc64b -plcc32 eeprom memor y * a t28c256 -plcc32 eeprom memor y * a t28hc256 -plcc32 eeprom memor y * a t28c256e -plcc32 eeprom memor y a t28c040 -44plcc t ype device fpga configurator a t17c65 dip8 fpga configurator a t17c128 dip8 fpga configurator a t17c256 dip8 fpga configurator a t17c65 soic20/plcc fpga configurator a t17c128 soic20/plcc fpga configurator a t17c256 soic20/plcc flash memor y * a t29c256 -dil28 need flash memor y a t29c256 -plcc32 flash memor y * a t29c257 -plcc32 flash memor y a t29c512 flash memor y a t29c010 flash memor y a t29c010a flash memor y a t29c020 flash memor y a t29c040a flash memor y a t49f010 flash memor y a t49f020 flash memor y a t49f040 serial eeprom a t24c01 serial eeprom a t24c01a serial eeprom a t24c02 serial eeprom a t24c04 serial eeprom a t24c08 serial eeprom a t24c16 serial eeprom a t24c164 serial eeprom a t24c32 serial eeprom a t24c64 serial eeprom a t24c32 soic14 serial eeprom a t24c64 soic14 serial eeprom a t25010 serial eeprom a t25020 serial eeprom a t25040 serial eeprom a t93c46 serial eeprom a t93c56 serial eeprom a t93c57 serial eeprom a t93c66 a vr micr ocontr oller a t90s1200 a vr micr ocontr oller a t90s1200a a vr micr ocontr oller a t90s2313 a vr micr ocontr oller a t90s8515-spi = a vr micr ocontr oller a t90s4414-spi = * please note: the following 28-pin flash & eeprom devices can only be suppor ted in plcc-32 package. the dil-28 package can not be suppor ted. = only serial (isp) pr ogramming mode is suppor ted
13 micro-pro user guide v1.04 intel t ype device micr ocontr oller 80c251sb micr ocontr oller 87c251sb micr ocontr oller d87c51-2 micr ocontr oller d87c51 micr ocontr oller d87c51 otp micr ocontr oller d87c51bh otp micr ocontr oller d87c52 micr ocontr oller d87c52 otp micr ocontr oller d87c52bh micr ocontr oller d87c51f a micr ocontr oller d87c51f a otp micr ocontr oller mr87c51/b micr ocontr oller d87c51fb micr ocontr oller d87c51fb otp micr ocontr oller d87c54 otp micr ocontr oller d87c51b otp philips/signetics t ype device micr ocontr oller sc87c51 micr ocontr oller sc87c51 otp micr ocontr oller sc87c52 otp micr ocontr oller s87c51f a micr ocontr oller s87c51fb micr ocontr oller s87c51fc micr ocontr oller 87c52ebpn otp micr ocontr oller 87c52epff a micr ocontr oller s87c51ccn40 otp micr ocontr oller s87c51 fb-4f40 otp micr ocontr oller s87c51ccf40 otp temic t ype device micr ocontr oller 87c251sb device suppor t continued dallas t ype device micr ocontr oller ds87c520
14 micro-pro user guide v1.04 or der code description pr ogramming systems a t -89c-2k-st atmel 89c micr ocontr oller star ter system (includes pk51-2k) a t -89c-8k-dv atmel 89c micr ocontr oller family development system (includes keil pk51-8k) mpw -plus micr o-pr o pr ofessional device pr ogramming system eq-8051-st1 flash 8051 pr ofessional star ter system uisp-s3-sys micr o-isp serial pr ogramming system for the atmel 89s/90s micr ocontr oller families a t -89s-isp-tr-2k integrated 89s micr ocontr oller t raining system (2k code) a t -89s-isp-tr-8k integrated 89s micr ocontr oller t raining system (8k code) a t -89s-isp-sys isp pr ogramming system for the atmel 89s micr ocontr oller family a t -89s-isp-dv -8k isp development system for the atmel 89s micr ocontr oller family (includes keil pk51-8k) evaluation/ oem modules a t -89c-x051-demo atmel 89c1051/2051 cr edit car d demo module a t -89c-x051-oem atmel 89c1051/2051 oem module ev alu8r-1p universal micr ocontr oller evaluation module oem-uc-20/40 universal 8051/a vr micr ocontr oller oem module package adaptors ad-plcc44-a package adaptor - plcc-44 to dil-40 (for pr ogramming/package conversion) ad-dil40-plcc44-a package adaptor - plcc44 to dil-40 (for emulation/package conversion) ad-tqfp44-a pr ogramming adaptor - 44-pin tqfp to 40-pin dil AD-SOIC20-A soic-20 to dil-20 adaptor module ad-8051-icpp in-cir cuit re-pr ogramming adaptor for the atmel 89c & 89s micr ocontr oller families ss-89s8252-p atmel 89s8252 isp 8051 socket-stealer module (dil-40) ss-89s8252-j atmel 89s8252 isp 8051 socket-stealer module (plcc-44) keil development language t ools pk51-2k keil pk51 lite - 2k c compiler , assembler & softwar e simulator pk51-8k-upg softwar e upgrade fr om pk51 lite (2k) to pk51-8k version pk51-8k-full softwar e upgrade fr om pk51-8k to full version pk51-manuals keil manual set for pk51 (c51, a51 & utilities) literatur e cd-a t98 atmel cd-rom data book db-8051-981 atmel 8051 micr ocontr oller data book miscellaneous lcd/kpd-v1 intelligent lcd/keypad oem module (rs-232 / 1k eeprom) memor y emulation pr oducts iceprom512k-80 iceprom eprom/ flash emulation system plcc32 head iceprom 32 pin plcc adaptor dip40 head iceprom 40 pin dip adaptor 8051 suppor t pr oducts guide
15 micro-pro user guide v1.04 or der code description programming systems a vr2-st pr ofessional a vr micr ocontr oller star ter system a vr1-8k-dv pr ofessional a vr micr ocontr oller development system a vr1-820k atmel a t90s1200/a t90s23x3 a vr micr ocontr oller star ter kit mpw -plus micr o-pr o pr ofessional device pr ogramming system uisp-s3-sys micr o-isp series iii pr ofessional serial pr ogramming system uisp-upg1 micr o-isp upgrade: atmel a tmega pr ogramming suppor t act -upg1 activ8r upgrade: atmel a tmega pr ogramming suppor t uisp-exp1 low v oltage (+3v) in-system pr ogramming (isp) expansion module ev alua tion/oem modules oem-uc-20/40 universal 8051/a vr micr ocontr oller oem module ev alu8r-1p evalu8r - universal 8051/a vr micr ocontr oller evaluation module p ackage adaptors etc. ad-plcc44-a pr ogramming adaptor - 44-pin plcc to dil-40 ad-dil40-plcc44-a emulation adaptor - 44-pin plcc on tar get system to 40-pin dil AD-SOIC20-A micr ocontr oller pr ogramming adaptor - 20-pin soic to 20-pin dil ad-soic8-a micr ocontr oller pr ogramming adaptor - 8-pin soic to 8-pin dil ad-8535-a parallel pr ogramming adaptor - atmel a t90s8535/a t90s4434 (40-pin dil) ad-tqfp44-a pr ogramming adaptor - 44-pin tqfp to 40-pin dil ss-90s8515-p isp socket stealer module fitted with atmel a t90s8515 micr ocontr oller (dil) ss-90s8515-j isp socket stealer module fitted with atmel a t90s8515 micr ocontr oller (plcc) a vr basic pr ogramming language a vr-bas-lite a vr basic lite v ersion (1k bytes - a t90s1200 suppor t only) a vr-bas-8k a vr basic 8k v ersion (8k bytes - all a vr derivatives suppor ted) a vr-bas-full a vr basic full v ersion (8k bytes - all a vr derivatives suppor ted) a vr-bas-8kf a vr basic 8k to full version upgrade iar a t90s language t ools ew a90bas-ee iar baseline t ool set - c compiler , assembler , debugger (8k code limit) ew a90 iar full a t90s v ersion - c compiler , assembler , debugger (unr estricted code) do-box (dynamically optimised basic box) + accessories dobox-st1 do-box star ter system 1 dobox-dv1 do-box development system 1 dobox-mod1 do-box module 1 dobox-pm1 do-box pr ototyping module dobox-am1 do-box applications module 1 litera ture cd-a t98 atmel cd-rom databook 1998 db-a vr-981 atmel a vr micr ocontr oller data book (paper for mat) man-a vrbas-ref a vr basic refer ence guide man-a vrbas-gs a vr basic getting star ted guide miscellaneous cab-ser1 pc serial cable adaptor kit (9w -25w & 25w -9w) cab-p ar25mm pc parallel cable (25w to 25w m/m 2m) a vr suppor t pr oducts guide
16 micro-pro user guide v1.04 miscellaneous accessories t op soic adaptor pin 1 cables cab-p ar25mm pc parallel cable (25w to 25w m/m 2m) power supplies psu-15250-uk, psu-15250-us, psu-15250-eu mains power supply adaptor 15v@250ma suitable for use with : micr o-pro pr ogrammer activ8r pr ogrammer adaptors 20-pin soic adaptor illustrated ad-plcc44-a AD-SOIC20-A ad-soic8-a ad-tqfp44-a atmel a vr micr ocontr ollers a t90s1200 6 4 6 6 a t90s1200a 6 4 6 6 a t90s2323 6 6 4 6 a t90s2343 6 6 4 6 a t90s4414 4 6 6 4 a t90s8515 4 6 6 4 a t90s4434 4 6 6 6 a t90s8535 4 6 6 6 atmel 8051 micr ocontr ollers a t89c1051 6 4 6 6 a t89c1051u 6 4 6 6 a t89c2051 6 4 6 6 a t89c4051 6 4 6 6 a t89c51 4 6 6 4 a t89c52 4 6 6 4 a t89c55 4 6 6 4 a t89s8252 4 6 6 4 a t89s53 4 6 6 4 1 top 44-pin plcc device pin 1 44-pin plcc adaptor illustrated
equinox t echnologies uk limited r eser ves the right to change any infor mation contained within this manual without prior notice. e&oe t er ms and pr oduct names contained in this document may be trademarks of others.

▲Up To Search▲

Price & Availability of AD-SOIC20-A

	To Download AD-SOIC20-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .